1. Clean the surface you will apply your label to. Then dry the surface. Make sure there is no dirt, dust or water on the bin.
2. Place the label on a flat surface with the backing paper facing up.
3. Holding the underside down, peel the backing paper making sure your hand doesnt lose contact with the backing paper. Its usually easiest pulling it towards yourself!
4. Align your label pushing ONLY the top edge of the masking tape down.
5. Use a firm flat edge and apply the label from top to bottom, forcing out the air as you go.
6. Peel a corner of the masking tape off the label and gently remove the masking tape making sure not to lift the label. Push it down if you do accidently lift it.
7. Leave it to dry! Do not test if it is stuck.